×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
16 Dec 2020
The Joomla and Kunena packages have been updated to the latest versions.
Forum for other models including the Coguaro.
  • Page:
  • 1
  • 2

TOPIC:

Sioux 50 10 years 10 months ago #2516

  • Jesse
  • Jesse's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 6
  • Thank you received: 0
Just picked up an 02 sioux. Cant find any information on the engine, and any help would be much appreciated :) also am confused at it having a dipstick, can anyone explain.
Cheers.

Re: Sioux 50 10 years 10 months ago #2517

  • overbomber
  • overbomber's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 847
  • Thank you received: 2
That would be to check the level of oil in the gearbox. I know the 2 stroke engine is lubricated by the fuel but you still need to oil the transmission cogs.

Welcome to the Network.

P

Re: Sioux 50 10 years 10 months ago #2519

  • Jesse
  • Jesse's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 6
  • Thank you received: 0
Have some scoring in the cylinder as well, i understand it is chrome plated, will it need a re-coating or are there still barrels available. Could i get away with a new piston and rings alone?

I have also attached an image of the piston, scoring is much deeper despite seller claiming to have fitted a new piston.

Re: Sioux 50 10 years 10 months ago #2520

  • Jesse
  • Jesse's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 6
  • Thank you received: 0

This image is hidden for guests.
Please log in or register to see it.


This image is hidden for guests.
Please log in or register to see it.

This message has an attachment image.
Please log in or register to see it.

Re: Sioux 50 10 years 10 months ago #2522

  • overbomber
  • overbomber's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 847
  • Thank you received: 2
That'll need re-plated - you can have a brand new piston and rings but the bore is damaged and rather than trying to source a replacement barrel it's easier to have it re- nicasil plated. Look out for companies offering this to the motocross lot. I had a kawasaki motocross barrel re-plated as it looked like your photo and it came back like new. These guys did mine;

www.langcourt.com/page26.html

It's not cheap but then you get what you pay for.

P

Re: Sioux 50 10 years 10 months ago #2526

  • Jesse
  • Jesse's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 6
  • Thank you received: 0
All the scoring is below the ports, so have been told it shouldnt affect compression? Is this the case or have i been told wrong? Does anyone have any idea what the resale is like on a rebuilt sioux? Cheers
  • Page:
  • 1
  • 2
Time to create page: 0.041 seconds
Powered by Kunena Forum