×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
16 Dec 2020
The Joomla and Kunena packages have been updated to the latest versions.
Forum for other models including the Coguaro.

TOPIC:

Gilera Crono Restoration 13 years 2 months ago #41

  • Scott_callaghan
  • Scott_callaghan's Avatar Topic Author
  • Offline
  • User is blocked
  • User is blocked
  • Posts: 97
  • Thank you received: 0
Heya i bought a Crono a few weeks ago with a faulty gearbox, since then i have stripped the bike and am getting it ready for a sandblast then powder coat. I am looking for a replacement engine so while i have the old engine out i have decided to tidy the bike up as i go. I am planning to get the plastics fixed and painted as well. I am looking to replace a few of the components to as things like the reg/rec, rear caliper need replacing. I will take a few pics of the bike as it stands now and will update the post with my progress. I also have a single swingarm from the af1 50 that i was thinking about using but i will have to check measurements first.

Re: Gilera Crono Restoration 13 years 2 months ago #42

  • pppdrive
  • pppdrive's Avatar
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 305
  • Thank you received: 3
Hi Scott and welcome. Look forward to seeing pics of your Crono 'as is' and later when it's back on the road. Can't help with a CX (much rarer than hens teeth) but you never know, so fingers crossed. Paul

Re: Gilera Crono Restoration 13 years 2 months ago #43

  • Scott_callaghan
  • Scott_callaghan's Avatar Topic Author
  • Offline
  • User is blocked
  • User is blocked
  • Posts: 97
  • Thank you received: 0
to be honest the main part from the cx i wanted was the single arm forks, the rest of the bike would be a bonus. i'm trying to load pics but can't figure out how to make them smaller in size and dimension

Re: Gilera Crono Restoration 13 years 2 months ago #44

  • pppdrive
  • pppdrive's Avatar
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 305
  • Thank you received: 3
I use the Fireworks program for re-sizing pictures as it operates in pixels. Most other programs will allow re-sizing but usualy state sizes in inches or mm which doesn't help if you want to restrict by pixel size. I will re-size pics to max 500 pixels if you want to e-mail them to me and I'll e-mail the resultant pics back to you. This email address is being protected from spambots. You need JavaScript enabled to view it. will find me
Paul

Re: Gilera Crono Restoration 13 years 2 months ago #46

  • Scott_callaghan
  • Scott_callaghan's Avatar Topic Author
  • Offline
  • User is blocked
  • User is blocked
  • Posts: 97
  • Thank you received: 0
i581.photobucket.com/albums/ss258/Scott_...oration/piccrono.jpg

The bike how it looked when i bought it


i581.photobucket.com/albums/ss258/Scott_...toration/Gilera2.jpg

How it looks now preparing for sandblast

Re: Gilera Crono Restoration 13 years 2 months ago #48

  • 72degrees
  • 72degrees's Avatar
  • Offline
  • Administrator
  • Administrator
  • So many menus and buttons - so little time
  • Posts: 779
  • Thank you received: 17
Keep track of all the bits Scott. :-) My Morini looked a bit like that a few months ago and when I came to put it all back together there were a couple of parts that had gone missing. They are probably buried at the back of the shed somewhere behind GFR#1. I can't sell you the engine from that because I've promised the bike to my lad when he's old enough.
"Do not adjust your mind, there is a fault in the reality"
1957 175 Sport
Time to create page: 0.037 seconds
Powered by Kunena Forum