×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username?
Forum
Machines
Other Models
1982 Gilera 50TS
×

Site and Forum Software Update

16 Dec 2020
The Joomla and Kunena packages have been updated to the latest versions.
Forum for other models including the Coguaro.
  • Page:
  • 1
  • 2

TOPIC:

1982 Gilera 50TS 6 years 1 week ago #6458

  • 72degrees
  • 72degrees's Avatar Topic Author
  • Offline
  • Administrator
  • Administrator
  • So many menus and buttons - so little time
  • Posts: 779
  • Thank you received: 17
Any 50TS owners still out there?

Enquiring on behalf of a VMCC member.
"Do not adjust your mind, there is a fault in the reality"
1957 175 Sport

Re: 1982 Gilera 50TS 6 years 1 week ago #6462

  • Rew
  • Rew's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 8
  • Thank you received: 0
Thanks, that would be me then.. any info on the 50 TS will be useful, as would a link to an online manual if such a thing exists, or a copy of one, or a real one even,

Re: 1982 Gilera 50TS 5 years 7 months ago #6729

  • Stevedevon
  • Stevedevon's Avatar
  • Visitor
  • Visitor
Hi there I have a 50 TS a 1982, bought approx 2 months ago. was imported into uk in 2015. great fun, but looking to put the larger 18 carb on for a bit more go.
I do not have a manual, but am looking out for one, and other parts

Steve

Re: 1982 Gilera 50TS 5 years 7 months ago #6730

  • Stevedevon
  • Stevedevon's Avatar
  • Visitor
  • Visitor
my TS 50

This image is hidden for guests.
Please log in or register to see it.

This message has an attachment image.
Please log in or register to see it.

Re: 1982 Gilera 50TS 5 years 7 months ago #6731

  • Rew
  • Rew's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 8
  • Thank you received: 0
Nice looking machine,i still haven`t got mine running properly, it starts but won`t rev and the idle is poor, finding an 18mm manifold could be a bit difficult.

Re: 1982 Gilera 50TS 5 years 7 months ago #6732

  • Stevedevon
  • Stevedevon's Avatar
  • Visitor
  • Visitor
An 18mm, may be difficult, however Bob Wright is off shopping in Italy this autumn for parts so hopefully he may return with one, fingers crossed.

re poor running, what state id the inlet manifold, any cracks letting air in under load?
  • Page:
  • 1
  • 2
Forum
Machines
Other Models
1982 Gilera 50TS
Time to create page: 0.118 seconds
Powered by Kunena Forum