Welcome, Guest
Username: Password: Remember me
16 Dec 2020
The Joomla and Kunena packages have been updated to the latest versions.
  • Page:
  • 1
  • 2

TOPIC:

Re: inlet manifolds 7 years 4 months ago #3294

  • Kano Nordi
  • Kano Nordi's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1700
  • Thank you received: 15
In an emergency thin steel sleeves could be pressed in to give an 8 or 10mm extension enough to get a rubber hose onto, but would reduce the bore of the manifold buy about 2mm B)
John

Please Log in or Create an account to join the conversation.

Re: inlet manifolds 7 years 4 months ago #3295

  • Joachim
  • Joachim's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 975
  • Thank you received: 29
looks like i should get hands on such a part and 'think' about that ;)

thx Joachim

PS just found the head gaskets under some other parts.... i will take photos ;)

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
  • 2
Time to create page: 0.060 seconds
Powered by Kunena Forum