×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
16 Dec 2020
The Joomla and Kunena packages have been updated to the latest versions.
Nordwest & RC600 Forum

TOPIC:

Re: Dreaded Water Pump leak 6 years 10 months ago #5737

  • overbomber
  • overbomber's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 847
  • Thank you received: 2
He did some at the start of the years as I know a guy who got his in February.

Apparently Bob can get them repaired/reconditioned too.

Re: Dreaded Water Pump leak 6 years 10 months ago #5742

  • Kano Nordi
  • Kano Nordi's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1728
  • Thank you received: 22
I bought Burgmann seal through their UK agents
www.southcoastseals.co.uk/Mechanical-seals

Cheers
John

Re: Dreaded Water Pump leak 6 years 10 months ago #5746

  • nig
  • nig's Avatar
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 169
  • Thank you received: 9
Thanks Kano, I will look int the link, Bob Wright gave me info of a firm in twickenham, middx, years ago, they did my RC pump, I was talking to Bob last week and he had no memory of it ! all the best.

Re: Dreaded Water Pump leak 6 years 10 months ago #5747

  • Greyeey
  • Greyeey's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 12
  • Thank you received: 0
I bought the seals trough southcoastseals last december. I ordered them with the following reference:
Burghmann German made seal with codes: P/No SBS/012LSS/CAN11

And I have since successfully rebuild my waterpump. The parts for the rebuild are relatively cheap, but I did get kinda screwed on postage to send the seal to the other side of the channel.

If you have all the parts and the tools the rebuild is quite easy, just make sure to handle the pump parts with care, they are aluminium and not the strongest.

Re: Dreaded Water Pump leak 6 years 4 months ago #6195

  • Tedted
  • Tedted's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 6
  • Thank you received: 0
Hi folks, this is my first time on here so apologies if I am not going through correct procedure. My water pump is now in bits and my garage tells me they need these bits in the picture I've attached. Are these the seals you all talk about and is it the french site rapidmouse I should use or south coast seals. Sorry to sound silly but I'm no mechanic and my garage have asked me to source these parts. Can anyone help please.

Re: Dreaded Water Pump leak 6 years 4 months ago #6196

  • norville2
  • norville2's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 34
  • Thank you received: 0
Hi,
You can drop "This email address is being protected from spambots. You need JavaScript enabled to view it." he was going to refurbish my pump for me, I would imagine he would be able to set you straight with what parts are needed.
Time to create page: 0.039 seconds
Powered by Kunena Forum