GeN Banner

×

Notice

The forum is in read only mode.

Welcome, Guest

Nordwest & RC600

×

Site and Forum Software Update

16 Dec 2020

The Joomla and Kunena packages have been updated to the latest versions.

Nordwest & RC600 Forum

Page:
1
2
3
4

TOPIC:

RC 600 4 years 8 months ago #7438

R1100RT Topic Author Offline Elite Member Posts: 172 Thank you received: 8	Joachim, can do and will forward tomorrow evening. John

RC 600 4 years 8 months ago #7440

Joachim Offline Platinum Member Posts: 1026 Thank you received: 42	just to be shure we are both talking about the same measurements ciao Joachim This message has an attachment image. Please log in or register to see it.

RC 600 4 years 8 months ago #7447

R1100RT Topic Author Offline Elite Member Posts: 172 Thank you received: 8	Hi Joachim, the dimensions are55mm x 235mm. This includes the black shadow. Regards, John

RC 600 4 years 8 months ago #7448

Joachim Offline Platinum Member Posts: 1026 Thank you received: 42	ok When i set the length to 235mm i get a height of 57,xxmm But not measured like in my pic above Measured from the lowest point of the R to the highest point of the R Just imagine a rectangle box around the RC You measured the same way? If yes, we got it My prefered file format is CorelDraw cdr. What did you need? I can also convert to Adobes ai format and some others. ciao Joachim

RC 600 4 years 8 months ago #7449

R1100RT Topic Author Offline Elite Member Posts: 172 Thank you received: 8	Hi Joachim, that’s perfectly good for me; can you supply either as an ai file plus a PDF? Many thanks, John

RC 600 4 years 8 months ago #7450

R1100RT Topic Author Offline Elite Member Posts: 172 Thank you received: 8	The printed logo on the existing seat is badly worn and the 55mm was a the result of a little guess work. 57mm will be fine. John

Page:
1
2
3
4

Nordwest & RC600

Time to create page: 0.184 seconds

Powered by Kunena Forum