×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username?
Forum
Machines
Nordwest & RC600
Resurrecting my Nordwest
×

Site and Forum Software Update

16 Dec 2020
The Joomla and Kunena packages have been updated to the latest versions.
Nordwest & RC600 Forum
  • Page:
  • 1
  • 2

TOPIC:

Resurrecting my Nordwest 3 years 5 months ago #7980

  • Bruno Brasletti
  • Bruno Brasletti's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 70
  • Thank you received: 2
I have been facing a strange symptom: the filler cap is not letting air in, making vacuum inside the tank and stalling the engine. I have tryed two caps but no improvement. I have installed a new aluminium tank thread form Bob Wright: do you have any similar ecperience? Do I have to change anythin on the cap due to the new thread? Thanks!

Resurrecting my Nordwest 3 years 5 months ago #7981

  • Bruno Brasletti
  • Bruno Brasletti's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 70
  • Thank you received: 2
I have also noticed that the rear brake pedal has a huge amount of travel: to start braking I have to get my foot almost vertical! Can you improve this? Thanks!

Resurrecting my Nordwest 3 years 5 months ago #7982

  • Joachim
  • Joachim's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1026
  • Thank you received: 42
of course
It's all this littel sticker :woohoo:

ciao Joachim
  • Page:
  • 1
  • 2
Forum
Machines
Nordwest & RC600
Resurrecting my Nordwest
Time to create page: 0.110 seconds
Powered by Kunena Forum