×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
16 Dec 2020
The Joomla and Kunena packages have been updated to the latest versions.
Nordwest & RC600 Forum

TOPIC:

Exhaust headers 3 years 2 weeks ago #8205

  • R1100RT
  • R1100RT's Avatar Topic Author
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 172
  • Thank you received: 8
Hi, can anyone tell me if there is any difference in dimensions for the headers from my 88/90 RC and a 93’ model Nordwest ; or are they a direct replacement?

Thanks in anticipation.

Exhaust headers 3 years 2 weeks ago #8209

  • Joachim
  • Joachim's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1026
  • Thank you received: 42
i didn't have a RC to compare.
But you have a Rc and i have an Nordie, so.... send measurements :)
If i remember right here is an original Nordie header out there in my garage here

ciao Joachim

Exhaust headers 3 years 2 weeks ago #8210

  • R1100RT
  • R1100RT's Avatar Topic Author
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 172
  • Thank you received: 8
Hi Joachim, hope you are well. I am unable to measure the Flanges accurately but the pipe ext. diameter is 31mm and the link pipe external diameter is 45mm.

Regards, John

Exhaust headers 3 years 2 weeks ago #8212

  • Joachim
  • Joachim's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1026
  • Thank you received: 42
it's raining and it's dark and cold in my garage
Is it ok to check it tomorrow?

:) Joachim

Exhaust headers 3 years 2 weeks ago #8213

  • R1100RT
  • R1100RT's Avatar Topic Author
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 172
  • Thank you received: 8
Absolutely fine with me, weather is foul here too.

Stay in!

Exhaust headers 3 years 2 weeks ago #8215

  • Joachim
  • Joachim's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1026
  • Thank you received: 42
shure for the 31mm?
The Nordie one has 32mm.
The link also is 45mm

If i remember right Luca sells his stainless replica header pipes fitting for RC, Nordie, RCR and RC/C. So i suppose Nordie headers will also fit for RCs

ciao Joachim
The following user(s) said Thank You: R1100RT
Time to create page: 0.027 seconds
Powered by Kunena Forum