×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username?
Forum
Machines
Saturno
Fairing isolation mount
×

Site and Forum Software Update

16 Dec 2020
The Joomla and Kunena packages have been updated to the latest versions.
Forum for Saturno
  • Page:
  • 1

TOPIC:

Fairing isolation mount 6 years 5 months ago #6172

  • Db7gtgrigio
  • Db7gtgrigio's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 72
  • Thank you received: 0
saturno has decided I did not adequately tighten one of the fairing to frame mounting screws and it has fallen off along with the rubber isolation bushing.

The rubber bushing is 25.5mm OD, with a steel spacer through the middle inner diameter 5.7mm. Length of the spacer is 21.4mm

Can't find anything close on the internet.

Anyone have a source for them???????

Re: Fairing isolation mount 6 years 5 months ago #6173

  • Kano Nordi
  • Kano Nordi's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1728
  • Thank you received: 22
My Saturno came to me without a fairing but I later fitted one, so had to adapt bits and make the instrument cluster brackets, I used the rubber mounting feet out of house/office air conditioner compressors, they were roughly 25mm o/d and made up sleeves to fit the bolts.
John
  • Page:
  • 1
Forum
Machines
Saturno
Fairing isolation mount
Time to create page: 0.107 seconds
Powered by Kunena Forum