×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username?
Forum
Machines
Saturno
Water Pump O ring
×

Site and Forum Software Update

16 Dec 2020
The Joomla and Kunena packages have been updated to the latest versions.
Forum for Saturno
  • Page:
  • 1

TOPIC:

Water Pump O ring 5 years 8 months ago #6646

  • Aus.GT
  • Aus.GT's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 62
  • Thank you received: 1
I'm replacing my water pump, but before I remove it does anyone have the size of the water pump O ring?

Re: Water Pump O ring 5 years 8 months ago #6647

  • Joachim
  • Joachim's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1026
  • Thank you received: 42
funny.
I will just order some of those rings this evening.
An old one is placed on my workbench at the place i work over the week.
I will tell the measurements later

ciao Joachim

Re: Water Pump O ring 5 years 8 months ago #6649

  • Joachim
  • Joachim's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1026
  • Thank you received: 42
so, i have just odered the O-rings
The rings for the 600ccm engines should have an inner diameter of 51mm and the ring has 2,5mm
For the 500 and 350ccm engines (with the smaller water pumps) you need 49x2,5mm rings.
BTW when my O-rings arrive one of them will go straight into a package to Australia.
Sop if you don't find one....

ciao Joachim

Re: Water Pump O ring 5 years 8 months ago #6650

  • ZacPike
  • ZacPike's Avatar
  • Offline
  • Premium Member
  • Premium Member
  • Posts: 142
  • Thank you received: 12
Hi Joachim

You are such a helpful chap.

Please can this information be saved on the parts page.

We really shouldn't have to search for this information over and over.

Ciao







“There is a delicate ridge one must ride between fear and reason on a motorcycle lean too far in either direction and there will be consequences.”
Lily Brooks-Dalton, Motorcycles I've Loved: A Memoir

Re: Water Pump O ring 5 years 8 months ago #6651

  • 72degrees
  • 72degrees's Avatar
  • Offline
  • Administrator
  • Administrator
  • So many menus and buttons - so little time
  • Posts: 779
  • Thank you received: 17
Sounds like a volunteer for upgrading to editor status ;)

[Edit] Done [/Edit]

Time to revisit my "Succession Planning" news item.
"Do not adjust your mind, there is a fault in the reality"
1957 175 Sport

Re: Water Pump O ring 5 years 8 months ago #6652

  • Aus.GT
  • Aus.GT's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 62
  • Thank you received: 1
Thank you for that information Joachim
  • Page:
  • 1
Forum
Machines
Saturno
Water Pump O ring
Time to create page: 0.112 seconds
Powered by Kunena Forum