float valve tip is perfect. I have tried the backing off both adjustment screws. I did however this afternoon spray some ether around the carb and the idle speed rose just a little. I removed the inlet manifold and it looks OK but the O ring that seals to the cylinder head is flat and hard - suspect it is leaking very slightly.
Carburettot help please
5 years 3 months ago #7087
Have you checked the float height?, crucial!. There is conflicting information on what the float height should be on the 350, there's a thread in the forum somewhere.
Alan.
The following user(s) said Thank You: Db7gtgrigio
Carburettot help please
5 years 3 months ago #7089
workshop manual gives identical float level setting for 350 and 500: 24 +/-2mm hed replacement floats cant be adjusted - the arms are plastic. My new float came at 24mm but is only 8.5gr......