×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
16 Dec 2020
The Joomla and Kunena packages have been updated to the latest versions.
Nordwest & RC600 Forum

TOPIC:

Nordwest starter 6 years 3 months ago #6252

  • Watt
  • Watt's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 18
  • Thank you received: 0
Hi I'm new here and just bought a 1992 nordwest that needs a starter. Does anyone know of any other model that will fit or am I screwed as parts seem few and far between
Thanks

Re: Nordwest starter 6 years 3 months ago #6253

  • overbomber
  • overbomber's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 847
  • Thank you received: 2
Is it the starter, or the starter clutch? In the style of the six million dollar man, they can be rebuilt - search on here, lots of info about alternative parts for the clutches etc.

Re: Nordwest starter 6 years 3 months ago #6254

  • Watt
  • Watt's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 18
  • Thank you received: 0
It's the starter the windings are down to earth
Stripped it and found one of the winding coils has a snapped coil

Re: Nordwest starter 6 years 3 months ago #6256

  • Kano Nordi
  • Kano Nordi's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1728
  • Thank you received: 22
Try West Country Winders to see if they can repair, I have used them a couple of time but not with a Gilera starter motor.
John

Re: Nordwest starter 6 years 3 months ago #6309

  • nig
  • nig's Avatar
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 169
  • Thank you received: 9
The starter body is the same as other japanese bikes (I had this chat with ZacPike) so swap nose parts or rear mounting/ brush housing and job can be done...was it a yamaha starter motor ZP ?

Re: Nordwest starter 6 years 3 months ago #6311

  • Watt
  • Watt's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 18
  • Thank you received: 0
Any idea what model
Time to create page: 0.034 seconds
Powered by Kunena Forum