×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
16 Dec 2020
The Joomla and Kunena packages have been updated to the latest versions.
Forum for Saturno

TOPIC:

Saturno Bialbero 3 years 2 months ago #8132

  • Joachim
  • Joachim's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1026
  • Thank you received: 42
nice found, worth to store somewhere :)
Is this the Yamaha parts # 324382180337 ?
No, at least Google did tell nothig about it :(

ciao Joachim

Saturno Bialbero 3 years 2 months ago #8133

  • Ritch369
  • Ritch369's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 10
  • Thank you received: 4
I think the number 324382180337 may be an eBay item number. I tried Googling "Yamaha R1 2006 rear brake pedal" which listed several sources. The Yamaha part number is 5VY-27211-00.

Ritchie
The following user(s) said Thank You: Joachim

Saturno Bialbero 3 years 2 months ago #8134

  • Joachim
  • Joachim's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1026
  • Thank you received: 42
ouch... therefore i only found one ebay auction ;)

Thanks Joachim

Saturno Bialbero 3 years 2 months ago #8136

  • Dougal
  • Dougal's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 7
  • Thank you received: 0
Hi John, no R1 to hand, just trawling fleabay. I figured it was a maybe it will fit with some modification so rolled the dice with £17.50. I was gobsmacked when it slid snug onto the foot rest. Now I have to find a decent frame repairer as the motor is out of a Nordwest. Sections of the frame have been removed!!!!!!!!!!!! With thanks and regards, Dave

Saturno Bialbero 3 years 2 months ago #8137

  • Kano Nordi
  • Kano Nordi's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1728
  • Thank you received: 22
Mine also fitted with a Nordwest engine fitted 2 x Keihin Cr carbs, I can send you pictures of my frame if needed?
John

Saturno Bialbero 3 years 2 months ago #8140

  • Dougal
  • Dougal's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 7
  • Thank you received: 0
Figured someone else would have done the upgrade. Think I may have a solution but a pic of one already done would be great, thank you. A six inch section of the trellis has been removed each side of the frame and replaced with a length of thin strapping with pigeon shit welding. I can send my email somehow? cheers dave
Time to create page: 0.030 seconds
Powered by Kunena Forum