Site and Forum Software Update

16 Dec 2020

The Joomla and Kunena packages have been updated to the latest versions.

Nordwest & RC600 Forum

Page:
1

TOPIC:

wiring diag for rc600 c [cobra] 10 years 4 months ago #3452

hookooekoo
Topic Author
Offline
Junior Member
Posts: 24
Thank you received: 0

Hi everyone, i'm after a wiring diagram for the above in particular the connector block colour scheme for the ignition switch, all the diagrams i've seen either show 4 or 6 wires connected. my bike has 5 wires coming from ign switch-yellow[G] green[Ve] orange[Ar] and two green/black[VN]!!! from the loom again 5 wires -red/yellow[RG] red/black[RN] and 3 reds[R]!!!!. The old block was cut out and lost after an attempted/hotwire theft! Hope all the above makes sense and maybe someone can help. thanks, martin

Re: wiring diag for rc600 c [cobra] 10 years 4 months ago #3455

Joachim
Offline
Platinum Member
Posts: 1026
Thank you received: 42

like the Nordies there are 2 different versions of the RC/C out there.
Induktive and capazitiv ignition.
The older ones should have 6 wires at the key switch.
5 of them in a connector and a single white/red wire at the switch side to a light blue one at the other side.

The 5 wires at the switch side are
blue, orange, green, yellow, green/black

At the other side of teh connector
black, red, red/black, grey/red, yellow.

If that would be of use for you, please send me your email adress per PM i will send you a pdf.

ciao Joachim