TOPIC:

At present I have no rear lights or brake lights on my RC600c., any ideas?

Thanks

Neville

Do you have power to the brake switch? if so follow the wires that go through a connector that can get full of grunge, then onto the bulb holder which also get a lot of dirt thrown at it.
John

as there is *no* light at all, it might be a problem with the ground wire.
And think easy and cheap, just swap out the bulb first. This little %$&# things sometimes are realy *#&%$

Joachim

Thanks will look at the earth wires as the back light unit and brake switch is new.

Well once again sorted my problem, It was a problem of my own making. I decided to buy new L-H switch block with the light/horn indication, now when I received my switch block I saw an extra wire not in the plug but thought it was just an earth wire. That wire is the reason none of lights worked other than the high and low bean. I replaced the new switch block with the old one that I removed from the bike and... hey presto all lights are back. Not sure what bike that switch block is for but definitely not for a RC600C.