Wahala dey the Nigerian way of saying Oh bollocks whats gone wrong now
The RC is coming back together and starting to look something like a bike again, engine in frame , exhaust and carbs fitted with new inlet stubs (chears BobW) clutch cover fitted fitted with kick start shaft bought from Germany, new Sprag clutch fitted and engine cranked over without cam belt, fit left side engine cover and cam belt turn engine by hand and approaching TDC with the valves opening we stop
check cam marks again, all correct, OK lets remove the cam belt and turn a again by hand, all turns easy
so cam belt back on and clunk again
OK so lets remove tappet covers for a look see, inlet side off OK, exhaust side long Allen bolt out, the short one has rounded off the hexagon
Grrr so removed right side radiator/cooling fan and the coil to give a little space, next I'll try to persuade it with a center punch to see if the little varmint can be tempted out of its hole
I shall be extremely pissed off if the engine has to come out just to drill the head off a bolt
Will keep you posted
John