GeN Banner

×

Notice

The forum is in read only mode.

Welcome, Guest

Nordwest & RC600

started popping on over run!

×

Site and Forum Software Update

16 Dec 2020

The Joomla and Kunena packages have been updated to the latest versions.

Nordwest & RC600 Forum

Page:
1
2
3
4

TOPIC:

Re: started popping on over run! 10 years 11 months ago #3004

overbomber Offline Platinum Member Posts: 847 Thank you received: 2	That happened to me a couple of weeks ago, there must be an echo in here......

Re: started popping on over run! 10 years 11 months ago #3005

Kano Nordi Offline Platinum Member Posts: 1728 Thank you received: 22	Pardon - please can you repeat that

Re: started popping on over run! 10 years 11 months ago #3006

overbomber Offline Platinum Member Posts: 847 Thank you received: 2	Don't worry, there'll be another one along in a minute.

Re: started popping on over run! 10 years 11 months ago #3010

booster Offline Junior Member Posts: 27 Thank you received: 0	Yeah, mine pops on the overun too. Flat spot at 4-5000 rpm to.The bottom end performance is'nt there realy but picks up at 5k. I recon it should be nice and crisp down low with decent pull, wont even pick up the front in first, not that I would ever wheelie on the public highway!

Re: started popping on over run! 10 years 11 months ago #3011

overbomber Offline Platinum Member Posts: 847 Thank you received: 2	Nah, it'll chug along until about 3.5/4k then whoosh. Get the carbs off and into an ultrasonic, the difference is incredible....plus that end can might not help.

Re: started popping on over run! 10 years 11 months ago #3012

booster Offline Junior Member Posts: 27 Thank you received: 0	Yeah, I agree, carbs coming off this weekend. Goning to remove the can rivets and open the can up aIbit as its abit quite and not as free flowing as I like.

Page:
1
2
3
4

Nordwest & RC600

started popping on over run!

Time to create page: 0.043 seconds

Powered by Kunena Forum