GeN Banner

×

Notice

The forum is in read only mode.

Welcome, Guest

Nordwest & RC600

×

Site and Forum Software Update

16 Dec 2020

The Joomla and Kunena packages have been updated to the latest versions.

Nordwest & RC600 Forum

Page:
1
2
3
4

TOPIC:

Re: Gearing. 10 years 7 months ago #3024

overbomber Offline Platinum Member Posts: 847 Thank you received: 2	Time to pull the carbs and get them ultrasonically cleaned I'd say.

Re: Gearing. 10 years 7 months ago #3025

Kano Nordi Offline Platinum Member Posts: 1728 Thank you received: 22	That's a lot of km's are any of the the receipts for engine rebuild items John

Re: Gearing. 10 years 7 months ago #3026

booster Topic Author Offline Junior Member Posts: 27 Thank you received: 0	I'll have to look through them, theres so many. The carbs were bought new in 2007. The engine sounds good, no smoke, no rattles, starts first time etc. engine feels good, carbs off and cleaned with carb cleaner and air this weekend.

Re: Gearing. 10 years 7 months ago #3032

overbomber Offline Platinum Member Posts: 847 Thank you received: 2	You might want to do the timing belt if it's acceleration you're after - a snapped belt is only gonna add to your pile of receipts.

Re: Gearing. 10 years 7 months ago #3035

booster Topic Author Offline Junior Member Posts: 27 Thank you received: 0	Got a receit for one but i'm going to remove the cover and check it.

Re: Gearing. 10 years 7 months ago #3037

overbomber Offline Platinum Member Posts: 847 Thank you received: 2	Check the date on it... The manual is in the user menu on the left under 'Handbooks & Manuals' funnily enough. Check the service data for Nordwest belts in that as I can't remember off the top of me head - every 2 years or 6000 miles I think.....

Page:
1
2
3
4

Nordwest & RC600

Time to create page: 0.026 seconds

Powered by Kunena Forum