×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
16 Dec 2020
The Joomla and Kunena packages have been updated to the latest versions.
Forum for Saturno

TOPIC:

Re: Cambelt puller...49euro? 12 years 3 months ago #987

  • 72degrees
  • 72degrees's Avatar
  • Offline
  • Administrator
  • Administrator
  • So many menus and buttons - so little time
  • Posts: 779
  • Thank you received: 17
There seem to be some 140/70s still around:
www.mandp.co.uk/productsList.aspx?kw=140+70+17&tier1=Tyres
"Do not adjust your mind, there is a fault in the reality"
1957 175 Sport

Re: Cambelt puller...49euro? 12 years 3 months ago #990

  • Kano Nordi
  • Kano Nordi's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1728
  • Thank you received: 22
Hi all,
The Nortuno was fitted with good condition 150-6-x17 Pirelli Dragons when I got it, so will stay on them for quite a while, they do feel agile and seen to stick well until I find a bit of sand in the middle of a corner :(
John

Re: Cambelt puller...49euro? 12 years 3 months ago #995

  • twistandgo
  • twistandgo's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 29
  • Thank you received: 2
Ahh - that's good news about 140/70's being available.

Those BT003's look tasty. Sticky, and designed for mid-size bikes...pricey though.

I'll let you know how it goes - have run out of money for this month...sigh.

:(

Re: Cambelt puller...49euro? 12 years 3 weeks ago #1104

  • Joachim
  • Joachim's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1026
  • Thank you received: 42
for those who are interested in such things.

Flywheelpuller 350 and 500ccm engines:
Buzetti M35x1,5 Rotax BZ5340
about 15Euro

Flywheelpuller 600ccm engines:
Buzetti M38x1,5 Suzuki Burgmann BMW650
BU5343
about 25Euro

ciao joachim
Time to create page: 0.037 seconds
Powered by Kunena Forum