TOPIC:

Hi Moggy,
If I remember you are using Nordie wheel in the W-P forks?
How did you overcome the stopper for the speedo drive bevel gear being in the wrong place?
My Saturno did not seem to to have anything on the R-H side to do this and I'm using a Nordie/gfr bevel drive adapted to fit, I also had the same problem on my Honda Xr when I fitted CRF forks and had to make little brackets to stop the plot turning around
John

I didn't need the stopper as the speedo drive is in effect a spacer and I just pinched the front axle up with a nut on the threaded end, tightened up the pinch bolts and it sits in place quite nicely.

It was a very nice plush ride around Whaley Bridge/Disley this afternoon and the bike felt great over the speed bumps too. A little too much fork dive for me under braking, but at least I have adjustment for it now.
Also need to bed the new disc and pads in.
A worthwhile mod......
I shall fit the kick-start to it when the next service is due then that'll be it as far as mods go I think.