×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username?
Forum
Machines
Other Models
Gilera Crono Restoration
×

Site and Forum Software Update

16 Dec 2020
The Joomla and Kunena packages have been updated to the latest versions.
Forum for other models including the Coguaro.

TOPIC:

Re: Gilera Crono Restoration 13 years 3 weeks ago #461

  • Kano Nordi
  • Kano Nordi's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1728
  • Thank you received: 22
Hi Scott,
Relax and put your feet up while ordering or making a puller :)
John

Re: Gilera Crono Restoration 13 years 3 weeks ago #462

  • Scott_callaghan
  • Scott_callaghan's Avatar Topic Author
  • Offline
  • User is blocked
  • User is blocked
  • Posts: 97
  • Thank you received: 0
put my feet up lol it takes me an hour and a half to walk to work and another hour and a half back, i usually finish at 1 in the morning so walking home at that time is getting a bit tedious, so i am putting all the hours in i can.

Re: Gilera Crono Restoration 13 years 3 weeks ago #463

  • Kano Nordi
  • Kano Nordi's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1728
  • Thank you received: 22
Scott_callaghan wrote:

put my feet up lol it takes me an hour and a half to walk to work and another hour and a half back, i usually finish at 1 in the morning so walking home at that time is getting a bit tedious, so i am putting all the hours in i can.


:( :( :( Ouch :S

Re: Gilera Crono Restoration 13 years 2 weeks ago #464

  • Joachim
  • Joachim's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1026
  • Thank you received: 42
I also would suggest to buy a puller.
You can get one from Buzetti and is available in most of the scooter shops.
I'm not shure if it was M22x1,5 or M21x1,5.
They are rather cheap and worth every penny.

ciao joachim

Re: Gilera Crono Restoration 13 years 2 weeks ago #465

  • Scott_callaghan
  • Scott_callaghan's Avatar Topic Author
  • Offline
  • User is blocked
  • User is blocked
  • Posts: 97
  • Thank you received: 0
I managed to get the flywheel off without one and found that the lines were out by about 3mm. I have lined them up now and when i went to start it the battery was flat lol. Then i ran out of time and had to go to work so will try tomorrow.

Re: Gilera Crono Restoration 13 years 2 weeks ago #466

  • Kano Nordi
  • Kano Nordi's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1728
  • Thank you received: 22
Hi Scott,
GeN and 1/2 of Gilera club.de are having their fingers crossed waiting to hear some good news from you.
Good luck
John
Forum
Machines
Other Models
Gilera Crono Restoration
Time to create page: 0.226 seconds
Powered by Kunena Forum