×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
16 Dec 2020
The Joomla and Kunena packages have been updated to the latest versions.
Nordwest & RC600 Forum

TOPIC:

Re: Nordwest 600 11 years 1 month ago #2245

  • overbomber
  • overbomber's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 847
  • Thank you received: 2
Now that will look cool. A nice bit of stainless hose will sit nicely with the motor - that green hose doesn't do your work justice. Hope it all runs well and you get some miles on it.

P

Re: Nordwest 600 11 years 1 month ago #2247

  • Tiagus
  • Tiagus's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Gilera Nordwest 600 1994
  • Posts: 41
  • Thank you received: 0
I have problem, dont know where is the cable for decompressor or where insert ouside the engine.
Gilera Nordwest 600 1994

Re: Nordwest 600 11 years 1 month ago #2248

  • Joachim
  • Joachim's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1026
  • Thank you received: 42
The Nordies did not have a decompressor.
Only modells with kickstarter have this.
If you have the spare parts lists, there is a drawing which will show you how the system is working.

ciao Joachim

Re: Nordwest 600 11 years 1 month ago #2252

  • Tiagus
  • Tiagus's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Gilera Nordwest 600 1994
  • Posts: 41
  • Thank you received: 0
ok, so the cable that goes the left cam goes into what? thats my question.
Gilera Nordwest 600 1994

Re: Nordwest 600 11 years 1 month ago #2254

  • Kano Nordi
  • Kano Nordi's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 1728
  • Thank you received: 22
Hi Tiagus,
If you have a bike fitted with a Kick start like Saturno and some RC models the cable connects to a finger that lifts the exhaust valve off its seat to allow the compression to be released, Nordwests don't have these parts fitted, I did find the kick start shaft in Germany which I fitted to my RC but have never seen the valve lifter advertised.
Far better and easier to have a good battery and forget kick starting B)
John

Re: Nordwest 600 11 years 1 month ago #2255

  • Tiagus
  • Tiagus's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Gilera Nordwest 600 1994
  • Posts: 41
  • Thank you received: 0
My starter has no power to run the engine. Now it just makes a clicking sound and does not rotate. That's why I wondered if there was a decompressor.
Gilera Nordwest 600 1994
Time to create page: 0.030 seconds
Powered by Kunena Forum